Gtechniq HALO Flexible Film Coating

Shake bottle well and wear gloves.
To apply HALO, your vehicle must be indoors and remain indoors, for at least 12 hours after the coating has been applied. For best results, good lighting is essential.
If applying to previously installed film, wash and decontaminate the vehicle with Gtechniq W5 Citrus All Purpose Cleaner and W6 Iron and General Fallout Remover.
With your surface fully cooled and dry, spray a 30% dilution of isopropyl alcohol (IPA) on to a Gtechniq MF1 ZeroR Microfibre Buff Cloth. This will remove any fingerprints or other surface contaminants ensuring you get the maximum number of chemical bonds between HALO and the film or vinyl.
Apply HALO evenly onto the application pad and set the bottle aside.
Apply with the applicator provided in overlapping strokes to an area roughly 2ft x 2ft.
After coating a panel remove residue with an MF1 cloth. Always remove from further than you have applied, working from the outside in.
Once applied carry out a final check with an MF1 cloth and a bright but diffused light source – this will identify any excess residue left on the surface.
Allow the coating to cure for at least one hour and repeat the application process so that all film and vinyl is coated with two layers of HALO.
An unopened bottle of HALO has a 12-month shelf life from the time of purchase.
Store in a cool/dry place, out of direct sunlight.
If opened, use within 3 months, if unopened, use within 12 months.

* Avoid direct application, paint or rubbers. *