Gtechniq Crystal Serum Light Ceramic

To apply Crystal Serum Light (CSL) make sure your vehicle is indoors and can stay indoors for 12 hours after application, do not apply in direct sunlight.
Only apply the product at a temperature between 5°c and 25°c.
Shake well and wear gloves.
Wash and decontaminate your paintwork thoroughly prior to application. If required, polish your paintwork, either by machine or hand, to remove any imperfections.
Spray Panel Wipe into a Gtechniq MF1 Microfibre Cloth and wipe down each panel in small sections.
Soak the application pad with 3 full measures of CSL from the pipette and work the liquid into the pad to get an even saturation.
Replace the lid on the bottle and set it aside – do not keep the bottle in your hand as this promotes premature curing.
Apply in overlapping strokes to an area roughly 2ft by 2ft (60cm x 60cm).
Immediately remove residue with an MF1 cloth – you may need to buff the same area several times, but avoid doing it with too much force.
We recommend the use of 2 cloths at any one time. Make sure the cloths are rotated during residue removal to prevent CSL curing in the cloth.
Inspect the surface for residue with a bright, diffused light source
If you have removed the residue and it cures fully, you should polish the area and reapply CSL.
As soon as you finish, put your MF1 cloths in water, wash and dry them as soon as possible.
Wait a minimum of 1 hour after applying CSL before applying EXO Ultra Durable Hydrophobic Coating, or C2 Liquid Crystal.
Store in a cool, dry place.
If opened, use within 3 months, if unopened, use within 12 months.

* Avoid direct application to plastic trims, rubbers and hard plastics. *